| Customization: | Available |
|---|---|
| After-sales Service: | Online Support, on-Site Maintenance |
| Warranty: | 1year |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
400m Truck Mounted Water Well Drilling Rig uses fulhydrauic control and drver the rotation of dniing tols with high eficiency.Iin dificut roads,the truckmachine is very fexlble and itcan used in exploraion of hydrology wels, shalow layer ofshale gas, terestial heat, coalmin gas exploraion or salvage work and so on.The advantages of truck water well driling rigs is full hydraulic, truck as chassis, feeding system and others.
1. The 400m Truck mounted water well drilling rig can use air DTH Hammer drilling and mud drilling.
2. Centralized control console is suitable for each manipulation and contro. Rapid puling and ifting reduce the auxiianry time and enhance the work eficiency.
3. The truck chasis adopts the 6x4 special crane chassis of brand Kaima&Foton and the main drive system,the transfr case, gearox, double.winch unit mud pump turntable, drilling tower, feed system are set up on the chassis
4. l's a hydraulicrotary drling rig with directional circulation. t is equiped with B850/2 mud pump which adopts the slury as the washing fluid and can dril on clay, sand and rock if it is equipped with suitable drilling bit.
5. The power of dnling mio comes from a diesel enoine. 12K CUMMINS enoine drves the laloe displacement hioh presure olunoer oumo and it is characteized bpowerful dynamic and stable performance.
6. The rotary head. rotation speed is 60-120rom stepless adiustment and the rotary torgue is 9600Nm.
7. The pullina force can be reaulated and controlled, which adaot the machine to deen hole drillina>>lt can set up a generator which is convenient to welding or illuminate for work at niaht.
8. Main winch are avallable on the rig so it is high efficiency when the rig drll on mud rock and on the weathering formation.
9. The main drve of ng is hwdrauic and the four landing lens and dilino fower are hvdrauic controled. Transfer case and mud oump clutch svsiem are also hvdrauic operated.
10. The Hvdraulic auxliary functions are easy and efficient for guide extension, boom swing, boom lift. quide dumping.
| Item | Spec. | Parameter |
| General | Chassis | 6X4 |
| Geology Drilled | All kinds | |
| Drilling Method | DHT & Mud Rotary | |
| Hole Depth (m) | 400 | |
| Hole Diameter (mm) | Φ140-Φ450 | |
| Rotation | Rotation Torque (Nm) | 9600 |
| Rotation Speed ( rpm) | 60-120 | |
| Feeding System | Drill Pipe Diameter (mm) | 89/102/114 |
| Drill pipe length (mm) | 3000/4500/6000 | |
| Pull back capacity (T) | 8.5 | |
| Pull back capacity(T) | 20 | |
| Winch | Lifting force of tool winch (T) | 1.5 |
| Length of steel wire rope(tool winch) (m) | 100 | |
| Engine | Rated power (Kw) | 92 |
| Electrical System (Volt) | 24 | |
| Compressor | Compressor Type | Rotary Screw/Separate |
| Truck Rated Horse power (HP) | 168 | |
| Pressure Required (Mpa) | 1.2-3.0 | |
| Air consumption (m³/min) | 11-35 | |
| Chassis | Rated Horse power (PH) | 400 |
| Discharge Standard | EU-2/EU-3 | |
| Drive type | 6*4 | |
| Max. Speed (Km/h) | 102.9 | |
| Steering wheel | left/right(optional) | |
| Mud Pump | Model | BW450 |
| Mud Pump Power type | Hydraulic or engine | |
| Mud Pump Displacement (L/Min) | 450 | |
| Mud Pump pressure (Mpa) | 5 | |
| Air Compressor | Compressor Type | Rotary Screw/Separate |
| Pressure Required (Mpa) | 1.2-3.0 | |
| Air consumption (m'/min) | 11-35 | |
| Weight&Dimension | Net weight (Kgs) | 17500 |
| Shipping (L*W*H) (mm) | 10800*2550*3630 | |
| Working size (L*W*H) (mm) | 10500*2550*9830 |
Used for drilling deep water wells in rural areas, farms, mountainous regions, or water-scarce zones.
Ideal for providing clean groundwater for households or small communities.
Provides reliable water sources for crop irrigation.
Especially suitable for arid and semi-arid farming areas.
Supplies process water for factories, mines, and construction sites.
Used in mining zones for both operational and worker use.
For surveying underground geological structures and hydrogeological conditions.
Assists in resource evaluation and environmental studies.
Can be used for drilling boreholes for piling, foundations, and other civil engineering works.
Often integrated with rotary or DTH (Down-the-hole) hammer drilling.
Suitable for shallow geothermal energy extraction for heating or small-scale power generation.
Rapid deployment in disaster-hit areas (e.g., after earthquakes or floods) to provide emergency water sources.
In addition to providing you with 400m Truck Mounted Water Well Drilling Rig, we can also provide you with many other depths of Truck Mounted Water Well Drilling Rig..
){kind=link}