300m Lightweight Full Hydraulic Core Drilling Rig Superior Performance in Core Drilling

• Customization: Available
• After-sales Service: Online Technical Support
• Condition: New
• Model NO.: 300m
• Max. Drilling Depth: 300m
• Specification: Hole Diameter: 65-213mm
• Trademark: Besdill
• Origin: China

Product Description

Brief Introduction

Why Partner with Besdrill?

1.One-stop procurement - From rigs to spare parts (e.g., drill pipes, hydraulic pumps)

2.Technical support - Guidance on rig selection for specific projects

3.After-sales network - Global spare parts availability

(Note: Replace bracketed details with actual company data for accuracy.)

Product Description

1.This type of drill rig could substitute imported products. It could be applied to exploration and prospecting of geology, metallurgy, coal, petroleum, natural gas, groundwater and other industries.

2.The drill rig is equipped with a series motor driving pump. The feeding and lifting of rotator are driven in the structure of cylinder directly pushing, with a 3.5m(11.5 feet) stroke. A single engine drives the rotation of spindle. It has four mechanical shifts of range of speeds, and the speed could be adjusted hydraulically with slepless change.

3.The rig is simple in structure. It is light and easy for transference; the mast has the functions of sliding and touching ground; the spindle lifted and lowered with hydraulic cylinder; it could be folded for transport and relocation. The spindle hole is in large diameter.

 

Feature

1.Hydraulic drive mode is used for this core drilling rig. Its power head is fully hydraulic. It is driven by 5 diesel engines. 4 hydraulic oil pump and 1 double gear pump are also equipped


2.Strong disintegration capacity is available. Split type design has been utilized for its power station, hydraulic oil tank, operating platform and drilling mechanism. So it can be freely adjusted. It can work in rather narrow space, as well as 45°-90° drilling angles.


3.High adaptability can always be found in this kind of core drilling rig, because it is suitable for drilling various strata.
 

Product Application

The core drilling rig is a kind of lightweight fully hydraulic core drilling machine for geological exploration, and it is portable. It is mainly used in complex terrains and inaccessible areas, and it is especially appropriate for diamond wireline core drilling technology.

Its main components include diesel power drill, hydraulic system, control system, main winch, wireline winch, power head, feeding system, feed system, and gripper (holder) for well mouth.


1. Geological Exploration & Mineral Development
Metal Ore Prospecting: Core sampling for gold, copper, iron deposits to evaluate grade and reserves
Coal Exploration: Coal seam structure analysis and gas drainage drilling
Strategic Mineral Surveys: Precision sampling of lithium, rare earth elements

2. Energy Sector
Oil & Gas Exploration: Shallow reservoir coring
Geothermal Wells: High-temperature rock drilling (compatible with L80/C110 drill pipes)
Uranium Exploration: Radioactive mineral sampling

3. Civil Engineering
Tunnel/Bridge Surveys: Rock mechanics testing and foundation stability assessment
Dam/Hydropower Projects: Bedrock integrity checks and leakage zone analysis
Transportation Routes: Stratigraphic surveys for highways/railways

4. Hydrogeology & Environmental Projects
Groundwater Exploration: Aquifer mapping and water quality sampling
Contamination Monitoring: Soil pollution investigation wells
Polar Research: Permafrost/glacial drilling (low-temperature adapted)

5. Scientific & Specialized Uses
Landslide Early Warning: Slope stability core sampling
Archaeological Drilling: Non-destructive stratigraphic sampling
Space Analog Testing: Lunar/Mars drill prototype trials

 

 

Product Parameters

 

Item		Specification
General	Geology Drilled	F=6-14
	Drilling Method	Wireline Diamond Core Drilling
	Drill System and Operation	Hydraulic
	Hole Diameter	65-213mm
	Hole Depth	300
	Drill Pipe Length	3000
Rotation & Feed System	Rotation Torque	Nm 1500
	Speed	rpm 200-1200
	Head Travel	mm 3300
	Pull Up Capacity	kgs 8000
	Pull Down Capacity	kgs 4000
	Pull-up Speed-slow Feed	meter/min 1.22
	Pull-up Speed-rapid Feed	meter/min 12.26
	Pull-down Speed-slow Feed	meter/min 0-1.88
	Pull-down Speed-rapid Feed	meter/min 0-16.90
Diesel Engine	Power	KW 92
	Model	YUNNET
Drill Pipe	Drill Pipe Length	m 3
	Drill Pipe Diameter	mm 60
Mud Pump	Flow Capacity	L/Min 160
	Max.Working pressure	Mpa 10
Hydraulic System	Hydraulic Tank Capacity	liter 130
Stabilizing Jack	4 Support Legs	Hydraulic
	Stroke	mm 1000
Mud System	With Water Swivel Back the Gear Box
	Max. Pressure	bar 20
Dimension	Shipping Length	mm 5800
	Shipping Width	mm 2000
	Shipping Height	mm 2500

 

Company Profile

is a specialized global supplier of lightweight fully hydraulic core drilling rigs, serving geological exploration, mining, and energy industries worldwide. We partner with top-tier manufacturers to deliver high-performance drilling solutions for challenging terrains and complex projects.

Our Advantages

1.Premium Equipment Portfolio
Supplies  rigs with:
    300m max depth and 65-213mm hole diameter (BQ/NQ/HQ)
    1500Nm torque and 200-1200rpm adjustable rotation
     Hydraulic wireline coring for efficient sample recovery

2.Technical Expertise & Customization
Provides rigs tailored for:
    Geological surveys
    Remote operations
    Multi-industry use (mining, oil/gas, groundwater)

3.Global Logistics & Inventory
Maintains ready stock of popular models.
Handles certifications, shipping, and customs clearance

4.Competitive Sourcing Model
Leverages direct factory partnerships for cost-effective pricing
No MOQ restrictions for flexible procurement
 

 

There are many product specifications. The price is subject to the actual situation.